You are currently browsing the tag archive for the ‘PLM’ tag.
Do you know the expression: “You have lies, damned lies and statistics”? Pointing to the fact that statistics are often abused to “prove” statements. A typical example from Hans Rosling, the Swedish statistics guru and entertainer: “In Sweden most of the people have an above average amount of legs!”
The proof: the Swedish average is 1.999 and as most of the people in Sweden have 2 legs, thus above average. Now it is time to share some statistics with you.
Last time, I asked readers of this blog to participate in a small survey about their PLM thoughts and experiences. Although many people have read the post, perhaps, not till the end, there are only 22 responses so far at this time. If you haven’t participated yet, please do so by answering: 6 questions – the result will be published in July. There are no rewards to win. The only thing we all will gain is the statistical insight of people who have read this blog and apparently are PLM minded.
What does it mean to be PLM-minded?
There are many discussions related to PLM. What is actually PLM? Is it A Journey ? Or is it a Vision? An IT-solution? An infrastructure? Or is it Boring or just the Opposite?
It is hard to tell what the purpose is of PLM really without some numbers to guide you. And when it comes to PLM decisions, I noticed that most of the companies, I am working with, believe they make decisions based on numbers and statistics. Personally I believe in our current society it is more the emotional side that drives our decisions, not pure the rational and numbers. This is another discussion.
We always find a way to interpret the numbers. For the outside world, we pretend we make decisions based on pure, objective criteria. This would mean you can capture an organization in numbers and decide from there what’s best for the organization. An utopia we will see after some small statistics.
Some numbers
In the past year I spent most of my time in eight PLM-related discussions, most of them still on-going. Here, some of the statistics
Size
Four of them are large enterprises, where the power is inside the business unit. They act as one company, (one logo) but actually every business unit is focused on their own business profit and loss. They are not genuinely motivated to think about synergy with other businesses in cases it affects their work. Sometime IT believes they can bring the synergy by defining the common tools.
The other four companies are more centralized enterprises; some of them are large, with a centralized management and a single target to deliver to the market. Therefore, for a PLM project, they are easier to work with as you have more a single voice, instead of an opinion with a lot of conditions.
Type
All eight companies are not in traditional PLM industries. They are either project centric industries, where every delivery is supposed to be unique, or they are an owner/operator of a collection of assets to be managed during a long lifecycle. The reason: since 2008 I am personally interested and driven to demonstrate PLM practices and capabilities are valid for other industries too.
All eight companies involved expressed in the current engagement that PLM is essential for their future.
Vision
The need for PLM comes from a vision. I believe you should start always with the vision. Before acting, you need to know what your goal is. And a goal does not mean you know what your pain is. Understanding the pains does not solve the future; it is a first step to help you shape a future with no more pains. A typical example that they are different can be found in the current economic crisis. Everyone experiences the pains and understands there is a need for change. But all we have a different opinion about that is the required change. There is no single vision?
From the eight companies, only two of them could express a clear vision where they want to be in the future. This means six of them either have not clarified their vision yet (still in work) or even do not believe there is a way to define the vision. They are more focused on solving a pain than creating a vision.
Game changer
In three companies, the PLM project is considered to be a game changer. It was not about just fixing actual pains. The target is to be different from the competition and achieve a competitive advantage. Game changers are the most complex projects. The company needs to have a clear vision. It needs to have a trust in the fact that changing the game is indeed possible. And finally game changing contains the word CHANGE, which most companies try to avoid (evolution no revolution). But game changers, when successful, have the dominant companies for several years before others catch up.
In relation to change, two of the eight companies believe will be impossible to change the game. Although individual persons in the organization believe it is required, their ERP implementation and its related implementation scope have already taken part of the logical PLM space. This is blocking any serious PLM initiative making the implementation a PDM implementation, which has less value.
Constraints
Four companies stated upfront IT-constraints that could not be discussed. This introduced a lot of complexity. Some of the IT-constraints were emotional (we just decided a year ago to standardize on software xyz – we cannot afford to change to something else now, perhaps in the future). Other constraints were quite irrational and were based on (IT) decisions to standardize on a technology or solution, irrelevant or counterproductive to the business needs.
ROI
Only three of the eight companies require an ROI estimate to convince the management. As mentioned before, everyone is looking for reliable numbers to support a decision. Still decisions are made emotionally, and ROI numbers might be based on statistics. These three companies believe that the ROI numbers will lead to the right decision.
Another three out of this eight companies did not need an ROI estimate. They think that what they will select as future solution is always justified: they just need PLM. The difficulty will come when they have to compare RFPs (Request for Proposal) from different vendors. Each vendor is focusing on its unique features, and from there the RFP review becomes an apples and pears comparison. Probably again the emotional decision will be made at the end. Most likely the cheapest to be sure nobody can be blamed.
PLM = PLM?
I believe the small amount of statistics provided in this post demonstrate that it is not easy to get a hundred percent common understanding of what PLM is about. Imagine what you would give as advice to one of these eight companies. This makes PLM difficult as a discipline as it is not just a collection of tools to implement. If you are selling hammers everything might look like a nail. Be aware of hammer PLM.
In addition to what is PLM, the majority of companies that claim to have implemented a PLM system do not necessary use PLM in all its capabilities. Often it is still more automation of the way the company worked before. Something you understand when attending PLM user conferences, like the product innovation conferences.
Innovation and disruption needed
I believe that in order to benefit in an optimal manner from PLM, a company needs to switch their mindset from being a departmental measured and triggered company into a customer centric company, where information flows and is shared with all relevant roles in the organization.
Sharing data, instead of owning data, is a big game changer. It requires companies to work different. In the past when you did not need to share data, you could store it anywhere and in any way you prefer to do this. It was your duty and job security to control the data. Now when an experienced person retires or leaves the company, we struggle to get this information back (or we lose it and recreate it later when needed again). Search engines become popular technology to find back data – if possible! I believe Search engines can help to connect the past to the future infrastructure, but there is more.
Sharing data does not mean storing data in the cloud. The cloud makes it easier to share data as the company can focus more on the business side of the solution instead of the IT-side where and how to store it at what cost. It is the awareness of the content (“Do I search for something that exists”) and the quality (“Can I trust what I have found”) that we share that needs to get the focus.
For data sharing a disruptive change is needed, which does not happen in the classical PLM environments. There we think too much in departments and a sequential (or concurrent) way of working.
Aiming for sharing is disruptive. The fact that engineers need to provide more accurate data is seen as a productivity loss instead of a gain through the whole organization – see an old post: “Where is my PLM ROI “?. Organizations normally do not like disruptions. Individuals do. If they find a cheaper and easier way to get their work done, they will grab this opportunity and not do anything more. However companies have the tendency and need to keep things more complex as it is not a single task the focus on. It is a complex network of interactions.
I had the chance to read two interesting topics in this context recently. First a relative new blog related to disruptive innovation: the Off-White papers. Although it is not about PLM, it describes the challenges related to disruptive innovation, and if you have a twisted PLM-brain you will get the message.
The same for a book I have been reading from H. Thomas Johnson called Profit Beyond Measure . Johnson describes in his book, based on cases from Toyota and Scania, a different business model focused on customer delivery instead of internal departmental optimization. Again my twisted PLM-brain got triggered by the customer centric business model. A favorite quote:
A continuously linked and balanced organization that “works to customer order” reflects a very different management style (and organization JV) than does a decoupled and discontinuous organization that “works to schedule”
It is the difference between managing by results (MBR) and managing by means (MBM). And I believe this is the target of modern PLM too.
Conclusion
Even with some small statistics I hope it is clear that PLM is not a simple activity as there are many constraints that can influence a project. Having an understanding about these constraints and being able to remove the blocking constraints is what I believe is the job of a PLM consultant.
Do you agree? Is there an easier world? I am looking forward to your feedback through the comments or through a response in the small survey: PLM, your opinion
It was Heraclitus, a Greek philosopher, living around 500 BC, who told the Greek people that change is the only constant: Τα πάντα ρεί – the title of this blog post. Apparently he was not a popular philosopher and telling people there will be change during a comfortable period of time in their society does not make you loved.
As I am personally passionate about Greece in my personal life, I have also some business activities in Greece. From these experiences, I wish Heraclitus would be their leading guru. Greece at this moment is stuck in their inability to change. Old habits and private interests prevent new initiatives, and the blame for their current situation goes to the outside world: Europe.
This trick has been used over and over again by politicians when a country needs to restructure or reorganize. Create an external enemy and the majority of people swallow their distressing situation. The outside world is to blame and thanks to the external focus nothing changes internally as the population focuses on the enemy first. Where Heraclitus implies there is always change, which could be evolution, it seems that the Greek need a revolution to change their old habits and patterns in order to adapt to the new global society.
But are the Greek the only ones that need to change?
Τα πάντα ρεί also came in my mind when I read Chad Jackson’s blog post: PLM requires Business Transformation ? Bollocks for the first time. I envy Chad’s powerful writing style, which calls for action, a BLOGFIGHT among the PLM community. Unfortunate due to the word Bollocks some of the younger PLM consultants (do they exist?) might not be able to participate to this blog fight as their parental filter on the computer has blocked the page.
My first impression from Chad’s post was that he claims we just need to go to for global centralized data management and build processes digital and automated. And as he calls a PLM journey bollocks, I suppose in Chad’s ideal world all would be done in a single step or focused project. A new Big Bang! The last known successful Big Bang was approx 13.798 billion years ago. All other Big Bangs failed.
Τα πάντα ρεί
However my first impression was not 100 % correct and after rereading the post and the related comments a more elaborated picture comes up. The few other PLM consultants that participated in the BLOGFIGHT demonstrated there are many viewpoints often based on the consultant’s background. Often PLM is associated with “The single source of the Truth”, it is precisely on that point where PLM as a concept is struggling. There is no single opinion for PLM.
I am glad that we (Chad and I) agreed there is a need for change. This axiom (another Greek word known from Euclid’s Elements) is to my opinion the first starting point to consider for any PLM implementation. If you do not expect change, you will be probably forced to customize the new system the way your company worked before, maybe a little faster, leaving the organization structure as-is. And by building automation similar to the as-is organization you actually make your organization less flexible to adapt for new concepts.
Why do most of the large automotive companies have a problem with their PDM / PLM platforms? Because they have automated and customized their environments year after year. For sure there was ROI (Return On Investment) at that time, but gradually it also created an inability to change. And change is happing faster and faster. Globalization has come up so fast that most large PLM implementations seem to be too rigid to change. What to do? Change their CAD system?
Τα πάντα ρεί !
Knowing that there will be always change, companies should anticipate for change. And this is what I mean by the PLM journey. If implementing PLM is a onetime shot, you might be shooting in your own foot. And if you do not change, you end up with the same problem that Greece is currently facing: revolution or bankruptcy. Revolution is something nobody sane wants, neither bankruptcy.
Evolution is the only way to go even if this is against the way we humans in general behave: we want things to stay the same.
Now combining all ancient Greek wisdom with modern PLM wisdom, I would like to post my five axioms for PLM.
- There will be always change – build your vision for the upcoming 5 – 10 years with the anticipation there will be change – do not try to consolidate the now.
- Look for the latest best practices, not your current best practices
- Implement systems (PLM / PDM / ERP) as much as possible Out-Of-The-Box again avoiding to become dependent on specific releases or fixed environments
- Focus on areas where there is direct visible ROI or long term strategic advantage. As there will be always change, identify where to improve or alter moving towards the big picture brings visible comfort (business wise / users wise)
- Focus on a clear and business oriented data model – it is easier to maintain data through a long lifecycle when their definition is clear. This is a call for open data standards (STEP / ISO) as they bring you long term flexibility.
Concluding notes and call for action:
- If you are a respected PLM consultant, feel motivated to continue the blog fight and share your thoughts here related to this post or related to Chad’s post.
- If you are a respected PLM consultant or PLM enthusiast, please take a moment to answer six questions in the following anonymous survey to share your opinion and background. The survey closes on July 1st 2013: http://www.surveymonkey.com/s/PYSMBJ9
I will publish the results in July.
LOOKING FORWARD TO YOUR RESPONSES
Related articles
- PLM is a journey (virtualdutchman.com)
WordPress indicated that this is my hundredth blog post since I started in 2008. A notorious PLM blogger would say: “Why did it take you so long to reach 100 posts? “ PLM blogging has been a journey for me, but in this post I want to focus on how PLM implementations should be perceived by companies: As a journey.
My previous posts might suggest that I am cynical about PLM because titles as “How come PLM is boring?” and “PLM at risk. It does not have a clear job” might give the impression that PLM is at the end of its lifecycle.
Let me be clear, I think it is not. We, PLM passionate people, are still trying to find the right method to promote the value of PLM to the minds of the management in companies. You would assume that the value PLM brings would make it a no-brainer. However for successful implementing PLM there is no standard approach (and definition). Often people believe PLM is an IT-solution. And the common sense is that you buy an IT-solution, you implement it and continue working in a better mode. That’s where the implementation fails as PLM is different. So let’s start our journey
A journey starts with a reason / target
Once you have decided you are going to make a journey there are several things to consider and some of them are obvious.
- Where do you start from ? The easiest part, but crucial.
- Where do you want to go? This is sometimes more difficult to achieve than the previous point, especially in cases when you only have an idea of the target.
- How do you travel? In which way do you want to reach your target? A fast and direct connection is expensive and considers the trip as a waste of time. An alternative is that you want to travel towards the target, meanwhile spending some money along the road and even make money from the experiences gained along the road? In that case, time spent is less an issue. It is the combination of having the target in mind, move forward in the right direction and simultaneously gain experience and benefits.
The fast approach
The fast approach is for many IT-systems a must. If you implement an ERP system, you know its exact purpose; it supports the scheduling and transactions through the organization. You cannot afford to have an old system and a new system work in parallel. And because these transactions are related to the financial state of the company, the management will always prioritize investments in ERP.
Another reason why ERP implementations can be reasonable fast is that you are not going to reinvent the way information is handled. It is more an improvement process than an innovation process. Although to be fair, moving towards multiple manufacturing locations and different costs centers can be considered as complex topics.
Why no fast approach for PLM ?
For PLM, there is no fast approach as there are so many areas that you can address? Too many jobs – remember my previous post? In addition, the exact meaning of all these jobs is not clear from the start.You have to prepare for a journey. And here is the main challenge. Management will not easily fund your journey as you cannot explain it specific results in comprehensible words to them. Management might be excited by the proposed value of PLM. Who does not need to be more competitive and innovative in the future? This message resonates particularly well among members of the board and shareholders.
But when it comes to implementation, there is usually only one cross-disciplines unit that can accomplish this assignment: the IT-department. And here is the crucial mistake discovered time after time where PLM implementations fail. PLM is a business transformation, not an IT-system implementation.
Business should lead this transformation, but it is very rare you find the right people that have the full overview, skills and availability to implement this transformation across departments. People from the business side will be primarily focused on their (small) part of the full process, leaving at the end the project to be done to IT.
But as the financial transactions are already taking care of in other systems, the company does not appear at risk. Accountant will never push for PLM as a life saver. Slow reducing margin, slowly diminishing market share often do not alert people in the board room. It requires a deep-dive from the management into these symptoms, which they do not wish to do – it takes time to learn and understand.
Autodesk and Aras somehow dream to have solved this issue by claiming their PLM tools are easy to implement, easy to configure. They are somehow stating: “Don’t worry about the IT-side, build what you need”. It is a bottom-up approach likely to fail as I learned from many SmarTeam implementations that never reached the enterprise level due to inconsistency and misunderstanding at management level.
The journey approach
There is only one strategy that works for PLM, which is starting from a clear vision from the top (the target/destination) and the belief that the target needs to be reached by business people supported by IT.
And in order to keep the business alive we will try to get closer and closer to the target, year by year: the journey approach. During the journey, various business needs and changes will be addressed as isolated but connected stages. Each stage should have its business targets and benefits. The advantage is that it is a learning experience where in every stage different business people are leading the subject. IT is always involved as the integrator of all stages. More on that in later posts.
There is a vital role required in the journey approach: The Guide(s). As implementing PLM is usually not a typical job for a company, it is something that you need to experience in order to do it right. And there are two types of guides:
- The travel agencies – companies that have collected the experiences from people around the world identified the places to go and often have done some local research to confirm the promises. In the PLM landscape, this is a company like CIMdata with their focus on PLM. There are also more specialized travel agencies that might focus on DIY trips (they provide infrastructure and support) or cruises (no escape). Here, I will not mention names, but there is always a demand for cruises.
- The local guides – this are usually individuals that have years of experience in the space they have been working. They know in detail where the dirt is and how to avoid swamps. In the PLM landscape, this is the PLM consultant with a focus on a particular product or on a certain part of PLM. The quality of a local guide varies a lot, and you need to examine their track record but I think they are required. Do not leave it to the travel agencies only.
To conclude after 100 posts. I am sure PLM is a journey. If you don’t know me by now, watch the movie below and browse through the top 10 most read individual posts to get an opinion.
Related articles
- PLM at risk – it does not have a single, clear job ! (virtualdutchman.com)
Last year, I read Clayton Christensen’s book “The Innovator’s dilemma – When New Technologies Cause Great Firms to Fail “. I was intrigued how his theory also applies to PLM and wrote about it in a blog posts last year.
Recently, I attended an HBR Webinar “Innovating over the Horizon: How to Survive Disruption and Thrive” , which raises serious implications for PLM. As presented by Clayton Christensen and Max Wessel, both professors in the Harvard Business School, I foresaw numerous consequences demanding attention.
I’d like to highlight some observations for you:
- Disruptive innovation will hit any domain – so also the PLM domain
- You are less impacted if your products/services are targeting a job to be done
- ERP has a well defined job – so not much discussion there
- PLM does not have a clear job – so vulnerable for disruption
- Will PLM disappear?
Disruption explained
The above diagram explains it all. Often products come into the market with a performance below customer expectations. The product will improve in time, and at a certain moment it will reach that expectation level. Through sustaining innovation, the company keeps improving their product(s) to attract more customers, and start delivering more than a single customer is asking for.
This is for sure the case in PLM. All the PLM vendors are now able to deliver a lot of functionality around global collaboration, covering the whole product lifecycle. Companies that implement PLM, just implement a fraction of these capabilities and still have additional demands. Still the known PLM vendors nearly always win when a company is searching for a new PLM solution.
Disruption comes from other technologies and products. In the beginning, they are not even considered by companies in that product space as a possible solution. As these products improve in time at a certain moment, they reach that level of functionality and performance, a potential customer can use these products to address their demands.
At this stage, the disrupters will nearly always win the battle. The reason is that they are more close to what the customer wants than the incumbents. Their product performance and price point are most likely to be more attractive than the incumbents´ portfolio.
Translating this to PLM it would mean: “Do not look for PLM systems as they already provide too much functionality, way above the line of customer desire”
As a PLM consultant, I need to provide some second thoughts to keep my job. There is much more behind Prof. Christensen’s theory, and I recommend before agreeing with what I write, read his books ! And although there is a horizontal time axis where the disruptive technology comes in, it does not indicate it will be this year or next year.
If you are aware that disruption can kill your business, how likely is it that it will happen in your business and when?
Professor Christensen makes two key points:
- Disruption will always happen, but this does not mean it is going to be fast and totally overtaking the old products. It might be a slower process as expected and incomplete. Here, I was thinking about disruptive cloud technology, which came in fast on the consumer level, but will it reach the business level too, in the same manner that it overrules the classical PLM platforms ? I am not sure about that (yet)
- If your company’s value is on delivering products, instead of delivering means to get the job done for your customer, you are extremely vulnerable for disruption.
As companies are looking to get their job done in the most efficient manner, they will switch at any time to new solutions that provide a better way to get the job done, often with a better performance and at a lower price point.
ERP has a well defined job
I realized that this is one of the big differences between PLM and ERP. Why is there such a discussion around the need for PLM and I do not catch the same messages from the ERP domain ? Maybe because I am a PLM consultant?
ERP has a clear mission: “To get the job done – deliver a product as efficient and fast as possible to the customer”. ERP is an execution system. Although ERP vendors as well are delivering more than their individual customers ask for, the job is more clear defined.
PLM does not have a clear job
For PLM, it becomes fuzzy. What is the job that PLM does ? Here, we get a lot of different answers. Have a look at these definitions from some vendors.
Quote from the Siemens website
CIMdata calls PLM “the most effective investment you can make to achieve product leadership.” AMR Research says “Companies committed to time to value in product innovation certainly cannot succeed without a sound PLM foundation.”
Product Lifecycle Management, or PLM, is a driver of successful product development, and a strategic contributor to business value across the enterprise. PLM helps product manufacturers manage complex, cross-functional processes, coordinating the efforts of distributed teams to consistently and efficiently create the best possible products
Quote from the Autodesk website
For companies of any size, Autodesk PLM 360 helps to streamline your business processes for more efficient product development, improved profitability, and higher product quality.
I also reviewed the websites from the other PLM vendors, and I can confirm: None of them is talking in a clear way which job needs to be done. All PLM solutions are around technology and products.
Companies want to get the job done
And here I come back to the webinar’s conclusion. If you want to secure your future as a company, you need to focus on the job to be done. And even better, focus on the experience to do the job and the best integration of these experiences in a total framework. See the slide below:
My interpretation is that PLM has not even reached level 1. Still many companies are struggling to understand the fundamental need(s) for PLM.
Interesting to see is that Dassault Systemes in their messaging and approach is already targeting level 2 – the experiences. If potential customers will embrace the experience approach without passing level 1, is something to observe.
Will PLM disappear ?
In my December 2008 blog post “PLM in 2050” and recently in The Innovator’s dilemma and PLM, I wrote that I believe PLM as it is currently defined, will disappear. Perhaps made redundant by a collection of disruptive technologies. Main reason is that PLM does not do a single, clear job.
One of these disruptive candidates to my opinion is Kenesto. They deliver “social business enterprise software to empower teams” as stated on their website. Kenesto is not considered as a competitor of classic PLM, starting on a different trajectory. For sure there will be more disruptive candidates aiming at different pieces of the PLM scope.
What do you think:
- Does PLM have too many jobs ?
- Will PLM survive disruption ?
PLM is a popular discussion topic in various blogs, LinkedIn discussion groups, PLM Vendor web sites and for the upcoming Product Innovation congress in Berlin. I look forward to the event to meet and discuss with attendees their experience and struggle to improve their businesses using PLM.
From the other side talking about pure PLM becomes boring. Sometimes it looks like PLM is a monotheistic topic:
- “What is the right definition of PLM ?” (I will give you the right one)
- “We are the leading PLM vendor” (and they all are)
- A PLM system should be using technology XYZ (etc, etc)
Some meetings with customers in the past three weeks and two different blog posts I read recently made me aware of this ambiguity between boring and fun.
PLM dictating Business is boring
Oleg Shilovitsky´s sequence of posts (and comments) starting with A single bill of materials in 6 steps was an example of the boring part. (Sorry Oleg, as you publish so many posts, there are many that I like and some I can use as an example). When reading the BOM-related posts, I noticed they are a typical example of an IT- or Academic view on PLM, in particular on the BOM topic.
Will these posts help you after reading them ? Do they apply to your business ? Or do you feel more confused as a prolific PLM blogger makes you aware of all the different options and makes you think you should use a single bill of materials ?
I learned from my customers and coaching and mediating hundreds of PLM implementations, that the single BOM discussion is one of the most confusing and complex topics. And for sure if you address it from the IT-perspective
The customer might say:
“Our BOM is already in ERP – so if it is a single BOM you know where it is – goodbye !”.
A different approach is to start looking for the optimal process for this customer, addressing the bottlenecks and pains they currently face. It will be no surprise that PLM best practices and technology are often the building blocks for the considered solution. If it will be a single BOM or a collection of structures evolving through time, this depends on the situation, not on the ultimate PLM system.
Business dictating PLM is fun
Therefore I was happy to read Stephen Porter´s opinion and comments in: The PLM state: Pennywise Pound Foolish Pricing and PLM where he passes a similar message as mine, from a different starting point, the pricing models of PLM Vendors. My favorite part is in his conclusion:
A PLM decision is typically a long term choice so make sure the vendor and partners have the staying power to grow with your company. Also make sure you are identifying the value drivers that are necessary for your company’s success and do not allow yourself to be swayed by the trendy short term technology
Management in companies can be confused by starting to think they just need PLM because they hear from the analysts, that it improves business. They need to think first to solve their business challenges and change the way they currently work in order to improve. And next look for the way to implement this change.
Changing the way to work is the problem, not PLM.
It is not the friendly user-interface of PLM system XYZ or the advanced technical capabilities of PLM system ABC, that will make a PLM implementation easier. Nothing is solved on the cloud or by using a mobile device. If there is no change when implementing PLM, why implement and build a system to lock yourself in even more?
This is what Thomas Schmidt (VP Head of Operational Excellence and IS at ABB’s Power Products Division) told last year at PLM Innovation 2012 in Munich. He was one of the keynote speakers and surprised the audience by stating he did not need PLM !
He explained this by describing the business challenges ABB has to solve: Being a global company but acting around the world as a local company. He needed product simplification, part reduction among product lines around the world, compliance and more.
Another customer in a total different industry mentioned they were looking for improving global instant collaboration as the current information exchange is too slow and error prone. In addition they want to capitalize on the work done and make it accessible and reusable in the future, authoring tool independent. But they do not call it PLM as in their business nobody uses PLM !
Both cases should make a PLM reseller´s mouths water (watertanden in Dutch), as these companies are looking for key capabilities available in most of the PLM systems. But none of these companies asked for a single BOM or a service oriented architecture. They wanted to solve their business issues. And for sure it will lead into implementing PLM capabilities when business and IT-people together define and decide on the right balance.
Management take responsibility
And here lies the management responsibility of these companies. It is crucial that a business issue (or a new strategy) is the driving force for a PLM implementation.
In too many situations, the management decides that a new strategy is required. One or more bright business leaders decide they need PLM (note -the strategy has now changed towards buying and implementing a system). Together with IT and after an extensive selection process is done, the selected PLM system (disconnected from the strategy) will be implemented.
And this is the place where all PLM discussions come together:
– why PLM projects are difficult
– why it is unclear what PLM does.
PLM Vendors and Implementers are not connected anymore at this stage to the strategy or business. They implement technology and do what the customer project team tells them to do (or what they think is best for their business model).
Successful implementations are those where the business and management are actively involved during the whole process and the change. And this requires a significant contribution from their side, often delegated to business and change consultants.
PLM Implementations usually lead to a crisis at some moment in time, when the business is not leading and the focus is on IT and User Acceptance. In the optimal situation business is driving IT. However in most cases due to lack of time and priorities from the business people, they delegate this activity to IT and the implementation team. And here it is a matter of luck if they will be successful:
- how experienced is the team ?
- Will they really implement a new business strategy or just automate and implement they way the customer worked before, but now in a digital manner ?
- Do we blame the software when the people do not change ?
Back to fun
I would not be so passionate about PLM if it was boring. However looking back the fun and enthusiasm does not come from PLM. The fun comes from a pro-active business approach knowing that first the motivating the people and preparing the change are defined, before implementing PLM practices
I believe the future success for PLM technologies is when we know to speak and address real business value and only then use (PLM) technologies to solve them.
PLM becomes is a logical result not the start.
And don´t underestimate: change is required.
What do you think – is it a dream ?
????
First of all happy new year to all of you. As there is no “End of the World” risk anymore in the near future , we can start looking forward and set our goals for the next 5 years or is it a 7-years plan Oleg ?.
Christmas, the moment the light returns on the Northern hemisphere, plus the food , cycling and the preparations for the next Product Innovation conference in Berlin were the drivers for this blog post.
The title might give you the impression that it is an IQ-quiz: “Which word does not fit in this sequence”? Well, It’s not, they are all related. Let’s put them in a chronological order.
Frogs
Frogs existed first, and were exploring the world before us humans. Paleontologists assume they had no notion of what was global. In their world it was probably a few ponds in size. For certain, they did not have anything to do with innovation. At that time, survival depended on the slow process of evolution.
Millions of years later, the first Homos appeared on the earth surface; Homo Sapiens, Homo Erectus, Homo Ludens and perhaps more. They all had something in common: Instead of waiting for the evolution which was ongoing, they started in parallel to innovate. First by walking upright, using a more advanced language to communicate and learning to have tools to achieve more. Their world was still within a reasonable walking distance and probably they started to eat frogs.
Human evolution
This evolution continued for thousands of years. Human beings started to spread around the world and in waves they brought innovation. They built stone temples, learned to sail, discovered gunpowder, electricity, the universe, the internet and more. It is interesting to see that every time a major innovation was born, these innovators enriched their region in wealth and culture, using their innovation as a competitive advantage to dominate their neighbors.
In many cases 1000 years later, this innovation became a commodity and other civilizations stood up with their innovation and dominated their regional environment which became bigger and bigger in size. Where possible they made use of the cheap resources (modern word for what was initially called slaves) to enrich their civilization. For certain, the most civilized were eating frogs!
Market expansion – innovation pace
During the last century, the pace of innovation went faster and faster. New ways of communication and transportation became available and affordable, which made it impossible for innovations to stay within a specific civilization. Innovation became available for everyone around the world and the domination shifted towards companies and markets.
Companies with a strategy to innovate, discovered that there were new ways needed to respond faster than before to market opportunities. This was the driving force behind PDM, as an first attempt to get a better grip and understanding of their fast evolving, more complex products, that require more and more global collaboration between design teams.
PDM is now accepted as critical by all manufacturing companies around the world, to guarantee quality and efficiency. Customer focus became the next demand from the market and interestingly enough, the demand for frogs decreased.
However this wave of innovation was followed by a wave with even greater impact on the global society. New technologies, the availability of internet and social media, suddenly changed society. Combined with the financial crisis in the US and Europe, it became clear that the way we worked in the past is no longer the way to survive in the future.
Faster and global
PLM was introduced early this century as a new strategy to become more customer-centric, being able to respond faster and better to market demands by bringing innovation to the market before the competition. PLM requires a different approach by companies to work internally and interact with the (global) outside world. The need to implement the PLM vision requires change and as it cannot be considered as an evolutionary process over several generations, it will be a business change. However, in general, human beings do not like rapid change. Here the frogs come back into the picture, now as the boiling frog metaphor.
It is based on 19th century anecdote describing a frog slowly being boiled alive. The premise is that if a frog is placed in boiling water, it will jump out, but if it is placed in cold water that is slowly heated, it will not perceive the danger and will be cooked to death. The story is often used as a metaphor for the inability of people to react to significant changes that occur gradually. This metaphor is very applicable for the classical approach companies bring their products to the market, where innovation is more a lucky coincidence than a result of a strategy.
Here it all comes together again.
Innovation is the only way for companies to avoid becoming a commodity – not able to differentiate for your potential customers. Now the title of this post should be clear: “Do not be a boiling frog, use PLM to support your innovation and become available for the global market”
As the new year has started and it is still time to extend your good intentions, add Innovation, PLM and Change to your survival list.
I look forward to your comments and hope to discuss with you the relation between PLM and Innovation during the upcoming Product Innovation event in Berlin, where I present a session with the title: “PLM loves Innovation ?”
(when you know me, you know the answer, but there are always surprises)
Related articles
- Are we as dumb as “Slowly Boiling Brainless Frogs”? (1) (blogs.redding.com)
“Confused? You won’t be after this episode of Soap. “
Who does not remember this tagline from the first official Soap series starting in 1977 and released in the Netherlands in 1979?
Every week the Campbells and the Tates entertained us with all the ingredients of a real soap: murder, infidelity, aliens’ abduction, criminality, homosexuality and more.
The episode always ended with a set of questions, leaving you for a week in suspense , hoping the next episode would give you the answers.
For those who do not remember the series or those who never saw it because they were too young, this was the mother of all Soaps.
What has it to do with PLM?
Soap has to do with strange people that do weird things (I do not want to be more specific). Recently I noticed that this is happening even in the PLM blogger’s world. Two of my favorite blogs demonstrated something of this weird behavior.
First Steve Ammann in his Zero Wait-State blog post: A PLM junkie at sea point-solutions versus comprehensive mentioned sailing from Ventura CA to Cabo San Lucas, Mexico on a 35 foot sailboat and started thinking about PLM during his night shift. My favorite quote:
Besides dealing with a couple of visits from Mexican coast guard patrol boats hunting for suspected drug runners, I had time alone to think about my work in the PLM industry and specifically how people make decisions about what type of software system or systems they choose for managing product development information. Yes only a PLM “junkie” would think about PLM on a sailing trip and maybe this is why the Mexican coast guard was suspicious.
Second Oleg in his doomsday blog post: The End of PLM Communism, was thinking about PLM all the weekend. My favorite quote:
I’ve been thinking about PLM implementations over the weekend and some perspective on PLM concepts. In addition to that, I had some healthy debates over the weekend with my friends online about ideas of centralization and decentralization. All together made me think about potential roots and future paths in PLM projects.
It demonstrates the best thinking is done during out-of-office time and on casual locations. Knowing this from my long cycling tours in the weekend, I know it is true.
I must confess that I have PLM thoughts during cycling.
Perhaps the best thinking happens outside an office?
I leave the follow up on this observation to my favorite Dutch psychologist Diederik Stapel, who apparently is out of office too.
Now back to serious PLM
Both posts touch the topic of a single comprehensive solution versus best-of-breed solutions. Steve is very clear in his post. He believes that in the long term a single comprehensive solution serves companies better, although user performance (usability) is still an issue to consider. He provides guidance in making the decision for either a point solution or an integrated solution.
And I am aligned with what Steve is proposing.
Oleg is coming from a different background and in his current position he believes more in a distributed or network approach. He looks at PLM vendors/implementations and their centralized approach through the eyes of someone who knows the former Soviet Union way of thinking: “Centralize and control”.
The association with communism which was probably not the best choice when you read the comments. This association makes you think as the former Soviet Union does not exist anymore, what about former PLM implementations and the future? According to Oleg PLM implementations should be more focused on distributed systems (on the cloud ?), working and interacting together connecting data and processes.
And I am aligned with what Oleg is proposing.
Confused? You want be after reading my recent experience.
I have been involved in the discussion around the best possible solution for an EPC contractor (Engineering Procurement Construction) in the Oil & Gas industry. The characteristic of their business is different from standard manufacturing companies. EPC contractors provide services for an owner/operator of a plant and they are selected because of their knowledge, their price, their price, their price, quality and time to deliver.
This means an EPC contractor is focusing on execution, making sure they have the best tools for each discipline and this is the way they are organized and used to work. The downside of this approach is everyone is working on its own island and there is no knowledge capitalization or sharing of information. The result each solution is unique, which brings a higher risk for errors and fixes required during construction. And the knowledge is in the head of experience people ….. and they retire at a certain moment.
So this EPC contractor wanted to build an integrated system, where all disciplines are connected and sharing information where relevant. In the Oil & Gas industry, ISO15926 is the standard. This standard is relative mature to serve as the neutral exchange standard of information between disciplines. The ideal world for best in class tools communicating with each other, or not ?
Imagine there are 6 discipline tools, an engineering environment optimized for plant engineering, a project management environment, an execution environment connecting suppliers and materials, a delivery environment assuring the content of a project is delivered in the right stages and finally a knowledge environment, capitalizing lessons learned, standards and best practices.
This results in 6 tools and 12 interfaces to a common service bus connecting these tools. 12 interfaces as information needs to be send and received from the service bus per application. Each tools will have redundant data for its own execution.
What happens if a PLM provider could offer three of these tools on a common platform? This would result into 4 tools to install and only 8 interfaces. The functionality in the common PLM system does not require data redundancy but shares common information and therefore will provide better performance in a cross-discipline scenario.
In the ultimate world all tools will be on one platform, providing the best performance and support for this EPC contractor. However this is utopia. It is almost impossible to have a 100 % optimized system for a group of independent companies working together. Suppliers will not give up their environment and own IP to embed it in a customer´s ideal environment. So there is always a compromise to find between a best integrated platform (optimal performance – reduced cost of interfaces and cost of ownership) and the best connected environment (tools connection through open standards).
And this is why both Steve and Oleg have a viewpoint that makes sense. Depending on the performance of the tools and the interaction with the supplier network the PLM platform can provide the majority of functionality. If you are a market dominating OEM you might even reach 100 % coverage for your own purpose, although the modern society is more about connecting information where possible.
MY CONCLUSION after reading both posts:
- Oleg tries to provoke, and like a soap, you might end up confused after each episode.
- Steve in his post gives a common sense guidance, useful if you spend time on digesting it, not a soap.
Now I hope you are not longer confused and wish you all a successful and meaningful 2013. The PLM soap will continue in alphabetical order:
- Will Aras survive 21-12-2012 and support the Next generation ?
- Will Autodesk get of the cloud or have a coming out ?
- Will Dassault get more Experienced ?
- Will Oracle PLM customers understand it is not a database ?
- Will PTC get out of the CAD jail and receive $ 200 ?
- Will SAP PLM be really 3D and user friendly ?
- Will Siemens PLM become a DIN or ISO standard ?
See the next episodes of my PLM blog in 2013
Early this year Dassault Systèmes (DS) announced their future strategy called 3DExperience and it is only now after their two major events, the 3DExperience forums in the US and Europe, that the discussion has started around the meaning of 3DExperience.
In February, I thought 3DExperience was just a new marketing approach from DS to differentiate themselves from other vendors. A little more 3D, PLM has a bad connotation and as some of the newcomers redefined what is PLM, it made sense to be different again..
One of my fellow European bloggers, Yoann Maingon started a discussion with his provoking blog post: Different Marketing Strategies And Naming in PLM. Read the post and specially the comments from Jim Brown and Joe Barkai, who bring perspective to this post. In addition this post got traction in some closed LinkedIn PLM groups and it was interesting to observe that different interpretations of PLM created somehow the same feeling that I have with religion.
Stay with the book and the definition of PLM and complete your portfolio was the message. But which book and what is PLM ? Even if I would write the book: “The Truth about PLM”, who would consider my book as the authority.
We have learned from religion that concepts based on a book can lead to wars.
I am sure PLM will not go into that direction and it remains important not to focus on the definition of PLM, but at the end you want your customers (current and future) to be more efficient, more innovative and profitable. And in order to achieve that, you need to look at the whole process, starting with market interaction and delivery to the customer.
And for that there are many tasks to perform in a company. During your sales process, you need to make sure you address in the best manner the demands from the customer or market, so you can differentiate yourself from others. It can be based on your track record (best in class since 1845), your price (always the cheapest as you manage the process efficient) or your experience (the price and the good feeling it gives justifies the decision)
What has become clear in the past ten years is that we are in a global, changing market and specially traditional companies struggle to make a change which is future oriented. Customer loyalty was in the past based on the fact that you were in the same region, later the same country, but now everyone is shopping or sourcing around the world. Traditional markets and business are no longer secure.
So companies have to change and to my opinion one of the most important changes they have to go through is managing all information in their company (and from outside) in a shared manner. Products can no longer be defined without taking into account feedback and interaction from the market. Trends (positive or negative) related to your company or products need to be followed as they can kill or hype a product or your company.
To realize this change a company needs to start working different and this leads at then end to the need for different tools to support your changing processes. Here I see PLM systems coming into the picture. And here there are the two approaches: will you be selecting a single vendor with the richest PLM platform, or will you integrate a set of best in class applications. As we saw in the Tech4PD discussion there is no ultimate decision here.
I see the 3DExperience strategy from DS in this light. The classical scope of PLM tools and practices does not provide a base for the current and future markets. The solution is bigger than tools, it is the focus on the total experience (I could not find another name either).
It is a way to become attractive for your customers and not focus only on the product but also the way you can influence your potential customers to choose your product or service above others. DS call this the new era of 3DExperience, others will market it different.
In a consumer market we select products based on experience. Has anyone ever tried to justify the purchase of an iPad as an affordable device they need for their work ?
It is the experience.
There is one thing I dislike from the 3DEXperience approach. Blogging becomes expensive, as writing down the word 3DExperience – a mix of numbers and characters – slows down my efficiency. I prefer 3DE or3DX as the most efficient set of keystrokes related to a TLA.
To my opinion PLM is not dead at all for DS. They just market the bigger picture different to be different from the classical PLM platforms. All PLM vendors have their unique marketing approach. Companies need to define what is their next step to remain in business and they are afraid for the old PLM, due to the horror stories – complexity, expensive, etc.
Is it selling experiences or perhaps is it making sure a new generation of workers will be motivated to work for your company. It remains a mix of classical PLM functionality, but it is also big data, social media and more interactive and friendly interfaces which are expected.
Finally one observation from the 3DExperience forum in Brussels where I believe they could have done a better job. Usually when customers and prospects go to this kind of events, they want to hear that they have chosen the right software provider. So it should be a mix of assuring them they are not alone (many others have chosen our solutions) and excited by the future vision your vendor has. Here they message that all companies need to sell experiences in the future otherwise they will be a commodity created a bad mood. Fear does not push people to change, it paralyzes people.
Conclusion: Dassault Systemes new 3DExperiences is understandable as a way to introduce a bigger picture than PLM alone. If every company needs THE EXPERIENCE approach has to be seen. In addition I believe DS still needs to work on more understandable examples where the 3DE approach is a differentiator. For sure there is PLM inside
A week later after the PLM Innovation conference in the US, I have time to write down my impressions. It was the first time this event was organized in the US, after having successful events the past years in Europe. For me it was a pleasure to meet some of my PLM friends in reality as most of my activities are in Europe.
With an audience of approximate 300 people, there were a lot of interesting sessions. Some of them in parallel, but as all session are recorded I will soon catch up with the sessions I have been missing.
My overall impression of the event: Loud en Positive, which is perhaps a typical difference between the US and Old Europe.
Here some impressions from sessions that caught my attention
Kevin Fowler, Chief Architect Commercial Airplanes Processes and Tools from The Boeing Company presented the PLM journey BCA went through. Their evolution path is very similar to the way Siemens and Dassault Systemes went through (driven by Boeing’s challenges).
Impressive was the amount of parts that need to be managed aircraft (up to a billion) and with that all its related information. Interesting to see that the amount of parts for the 787 have strongly decreased.
After PLM Generation 1 based on Teamcenter and Generation 2 based on Dassault Kevin demonstrated that functionality and cost of ownership increased due to more complexity, it was evident that usability decreased.
And this will be a serious point of attention for Generation 3, the PLM system BCA will be selecting for 2015 and beyond. Usability has to increase.
And as we were among all the PLM vendors and customers, during the breaks there was a discussion, which PLM vendor would be the preferred next partner for PLM. I had a discussion related to PLM vision and visibility with one of the SAP partners (DSC software Inc.). He is convinced that SAP provides one of the best PLM platforms. I am not convinced as I see SAP still as a company that wants to do everything, starting from ERP. And as long as their management and websites do not reflect a PLM spirit I am not convinced. In 2015 I might be wrong with my impression that PLM, Usability and SAP are not connected.
Note: browse to this SAP PLM rapid-deployment solution page and view the Step by Step guide. Now the heading becomes SAP CRM rapid-deployment solution. A missing link, marketing or do they know the difference between PLM and CRM ?
Next Nathan Hartman from Purdue University described his view on future PLM which will be model-based and he presented how PLM tools could work together describing a generic architecture and interfaces. This is somehow the way the big PLM Vendors are describing their platform too, only in their situation more in a proprietary environment.
- Nathan gave an interesting anecdote related to data sharing. He mentioned as example a 3D model that was built by one student and he asked another student to make modifications on it. This was already a challenge and even working with the same software lead to knowledge issues, trying to understand the way the model was built. Demonstrating PLM data sharing is not only about having the right format and application, but also the underlying knowledge needs to be exposed
Monica Schnitger, as business analyst presented her thoughts on PLM justification. Where in Munich I presented Making the case for PLM session, Monica focused on a set of basic questions that you need to ask (as a company) and how you can justify a PLM investment. It is not for the big kids anymore and you can find her presentation here (with another PLM definition).
I liked the approach of keeping things simple, as sometimes people make PLM too complex. (Also as it serves their own businesses). Monica presented that a company should define its own reasons for why and how PLM. Here I have a slight different approach. Often mid-market companies do not want PLM, they have pains they want to get rid of or problems that they want to solve. Often starting from the pain and with guidance from a consultant companies will understand which PLM practices they could use and how it fits in a bigger picture instead of using plasters to fix the pain.
Beth Lange, Chief Scientific Officer from Mary Kay presented how her organization, operating from the US (Texas), managed a portfolio of skin care products sold around the world by an independent local sales force all around the world. In order to do this successfully and meet all the local regulatory requirements, they implemented a PLM system where a central repository of global information is managed.
The challenge for Mary Kay is that from origin a company with a focus on skin care products and an indirect sales force, where sometimes the sales person has no IT skills, this project was also a big cultural change. Beth explained that indeed the support from Kalypso was crucial to manage the change. Something which I believe is always crucial in a global PLM project where the ideal implementation is so different from current, mainly isolated practices.
As regulatory compliance is an important topic for skin care products, Beth explained that due to the compliancy rules for China, where they have to expose their whole IP, the only way to protect their IP was putting a patent on everything, even on changes.
Would NPI mean New Patent Introduction in the CPG market ?
Ron Watson, Director, PLM COE and IT Architecture
from Xylem Inc. presented their global PLM approach. As the company is is relative young (2011) but is a collection of businesses all around the world, they have the challenge to operate as a single company and sharing the synergy.
Ron introduced PDLM (Product Data Lifecycle Management) and he explained there was first a focus getting all data under control and make it the single source for all product data in a digital format, preferably with a minimum of translation needed.
Here you see xylem has chosen for an integrated platform and not the best of breed applications. After having the product data under control the focus can be on standardizing processed overall the company. Something which other companies that have followed this approach, confirm it brings huge benefits.
As it was a PTC case study, Graham Birch, senior director of Product Management from PTC did the closing part. Unfortunate by demoing some pieces of the software. A pity as I believe people do not get impressed by seeing some data on the screen they recognize. Only when there is a new paradigm to demonstrate related to usability I would be interested.
And as-if they have read my mind, Daniel Armour from Joy Global demonstrated the value and attractiveness of 3D Visualization tools in their organization. Joy Global is manufacturer of some of the biggest mining equipment and he demonstrated how 3D Visualization can be used in the sales and marketing process, but also during training and analysis of work scenarios.
His demonstration showed again that 3D as a communication layer is attractive and appeals to the user (serious gaming in some cases).
As it was a SAP case, I was surprised to hear the words from Brian Soaper, explaining the power of 3D for SAP users and how SAP users will benefit from better understanding, higher usability etc. Iw as as-if a 3D-CAD/PLM was talking, was this a dream ?
I woke up out of this dream when someone from the audience asked to Daniel how they would keep the visualizations actual, is there a kind of version management ? Daniel mentioned currently not but you could build a database to perform check-in/checkout of data. Apparently all the 3D we have seen is not connected to this single database SAP always promotes.
Peter Bilello, CIMdata’s president had a closing session with the title: Evaluate the tangible benefits from PLM can prove complex, which indeed is true. Peter’s presentation was partly similar to the presentation he gave early this year in Munich. And this is what I appreciate about CIMdata. Some people in the audience mentioned that many times it is the same story and many of the issues Peter was presenting are somehow known facts. And this is what I like about CIMdata, PLM is not changing per conference or new IT-hype. If you want to understand PLM, you need to keep to the purpose and meaning of PLM. And these known facts apparently are not so known, a majority of PLM projects are executed or lead by people that decided to invent the wheel,as inventing the wheel seems cheaper than renting a wheel, and this lead again to issues later that every experienced consultant could foresee.
The evening with a champagne reception on the paddle boat making a tour around the lake and a dinner at the lake side concluded this first day.
The combination of presentations, scheduled network meetings and enough network time made it a successful first day
Next day I started with a BOM management Think Thank were in the target was to come to some common practices and understanding of BOM management. As the amount of participants was large and the time was short we only had a chance to touch the surface of the cases brought in.
What was clear from this session to me is that most challenges reported were due to the fact that the tools were already in place and only afterwards the PLM team (mostly engineering people) had to struggle to make it into a consistent process. They do not get a real help from PLM vendors or implementers, as their focus is on selling more tools and services.
What is missing for these organizations is a PLM for Dummies methodology guide, which is business centric instead of technology centric. For sure there are people who have published PLM books, but either they are not found of relevant. And as nothing comes for free, these companies try to invent the wheel again. PLM is serious business.
The first keynote speech from the second day was from Dantar Oosterwal, Partner and President of the Milwaukee Consulting Group, who inspired us with Lean and PLM: Operation Excellence and this all related to his experiences with Harley Davidson.
It was interesting how described the process of focusing on the throughput to get market results. There are various parameters how you can influence market share, by a price strategy, by increased marketing , but the most impact on Harley Davidson sales result was the effect of innovation. More model variants being the choice for more potential customers. By measuring and analyzing the throughput of the organization an optimal tuning could be found.
Dantar also shared an interesting anecdote about an engineer that had to study the impact of ethanol as fuel for a certain engine. And after a certain time the engineer came back with the answer: yes we can. He answered the question but left no knowledge behind. Where a similar question was asked about performance to a supplier and he came back with an answer and graphs explaining where the answered was based upon. This answer created knowledge as it could be reused for similar questions. It is a good example how companies should focus on collecting knowledge in their PLM environment instead of answers on a question.
The second keynote speaker was from the world biggest brand, Christopher Boudard, PLM Director from the Coca Cola Company. With its multiple brands and global operations it is a challenge to work towards a single PLM platform. He explained that at this stage they are still busy loading data into the system, where a lot of time is spent on data cleansing as the system has only value when the data is clean and accurate.
And this requires a lot of motivation for the PLM team to keep the executive management involved and sponsoring a project that takes five years to consolidate data and only then through the right processes make sure the data remains correct.
Christopher demonstrated in a passionate manner that leadership is crucial for such a project to be successful and implemented. For me as an European it was interesting to see that the world biggest brand PLM Director is a French citizen inspiring the management of such an American company.
Monica Schnitger conducted an interesting session about the state-of-the-state of multi-platform PLM.
If you cannot understand this tittle, it was a debate between the PLM vendors ( Aras, Autodesk, Dassault Systemes, PTC, SAP and Siemens) about openness, interoperability, cloud and open source.
After the first question from Monica about the openness of each of the vendor’s systems, it was clear there are no problems to expect in the future. All systems were extremely open according to the respondents and I lost my attention for the debate somehow as I had the feeling I was listening to an election debate. Monica did her best to make it an unbiased discussion, however I feel when some people want to make a specific point and use every question to jump on that it becomes an irritation.
Chad Jackson, this time dressed up as the guy that is always killed in the first 5 minutes of a Star Trek episode, shared with us the early findings of the 2012 State of PLM. Tech4PD followers, and who is not a follower, understood he lost the bet of the second episode.
Chad let me know if this picture needs to be removed, as it can kill your future career.
The preliminary findings Chad was sharing with us that manufacturing and service where significant interested and consumers of PLM data, but do not consider it as their data, where they have to contribute too also. The fact that it is available makes them involved in using the data, still these departments do not show active participating in PLM. Somehow this confirms the observation that PLM is still considered as an engineering tool, not as an enterprise wide platform.
As the initial group of participants (n = 100) is small and not random selected from an overall population, the questions remains what the state of PLM is in 2012. I assume Chad will come back on that in a later time.
The last plenary sessions, David Karamian from Flextronics and Michael Grieves, a Virtual Perfect Future, had the ungrateful position being the last two speakers of this event. I have to review David’s presentation again as it was not easy to digest and recall a week later what were his highlights. Michael’s presentation was easier to digest and I also believe with the new upcoming concepts and technology the virtual perfect future is there.
Looking back on a successful event, where I met many of my PLM peers from across the ocean, I will take the upcoming weeks to review the sessions I missed. Final good news for all PLM mind sharers, is the fact that CIMdata and MarketKey announced the coordination of their upcoming events next year – more content and more attendees guaranteed.
If your are reading blogs related to PLM, I am sure you have seen a blog post from Stephen Porter (Zero Wait State), for example: The PLM state the walking dead – PLM projects that never end.
Like Stephen, I am often triggered by an inspiring book, a touching movie or a particular song combined with my PLM-twisted brain I relate the content to PLM (there is no official name for this abnormality yet).
When driving home last week, I was listening to Phil Collins – In the air tonight
As I was just coming back from a discussion around PLM tools, BOMs and possible PLM expansion strategies in a company with customers and resellers, my twisted brain was thinking about two PLM related topics that were in the air tonight (at least for me).
Granularity vs. Integration: Suites vs. Best-in-class PLM
You must have noticed it, and if not, now you are aware: Jim Brown and Chad Jackson started a PLM duel discussion platform at Engineering.com to bring PLM related topics to the table: TECH4PD. Watch them argue and I hope with your feedback and the feedback of the PLM community, it will help us to make up your mind.
The topic they discussed in their first session was about two different approaches you can have for PLM. Either start from a best in class PLM platform or build your PLM support by using dedicated applications and integrate them.
This is to my opinion one of the fundamental PLM topics to discuss. And if I would have to vote (as Jim and Chad ask you to do so), I would first vote for Chad (integration of software) and after a second thought, vote for Jim (best in class PLM). So see my problem.
If I relate the discussion to my experiences with different companies, I realized that probably both answers are correct. In case you are an OEM you likely would benefit from a best in class PLM platform, as PLM systems aim to cover and integrate all data through the product lifecycle in a single system, single data model, etc.. So a good PLM platform would have the lowest cost of ownership in the long term. OEMs are by definition not the smallest companies and in general have the highest need for global coverage.
But not every company is an OEM. Many mid-market companies are specific suppliers,serving different OEMs and although they also develop products, it is in a different context of market delivery. There is a need to be flexible, as their products used by OEMs might become obsolete in the near term, they need to be more flexible, reactive. and the best in class companies innovate and are proactive. For that reason they do want to invest in a best in class PLM system, which somehow brings some rigidness , but keep on optimizing these areas where improvement is needed in their organization, instead of changing the organization.
I believe this question will remain in the air until we get a clear split between these two types of PLM. There is a trend splitting classic PLM (OEM oriented) and new upcoming PLM solutions. Till that time, we will be confused by the two approaches. It is a typical PLM disease and the reason you do not experience the same discussion for ERP is obvious. ERP is much more a linear process that both for the OEMs and mid-market companies is aiming to manufacture products or goods at a single location. The differentiation is in global manufacturing. Where do you manufacture your products ? Here the OEMs might have a bigger challenge. Global manufacturing is a PLM challenge too, which is in the air.
Where is the MBOM ?
This is the topic most visited in my blog and I am preparing a session with the MBOM as theme combined with PLM for the upcoming PLM Innovation US conference end of October in Atlanta. I am not going to disclose all the content here, but I will give you some thoughts that are in the air.
Companies historically manage their BOM in ERP, but as a result of globalization they now need to manage their manufacturing BOM at different locations. But each location has its own ERP and a local (M)BOM. What to do ?
This is in the air:
 |
|
I hope you will participate in both discussions that are the air, either by commenting to this blog, through Tech4PD, your blog (Oleg ? 😉 ) or your participation at PLM Innovation US.
Looking forward to discuss with you about what you believe is in the air tonight.
Conclusion (as usual): It is a busy time – we are heading towards the end of the year, which for some reason is a deadline for many companies. So no long thought processes this time, just what is in the air.
Jos Voskuil's Weblog 
Interesting reflection, Jos. In my experience, the situation you describe is very recognizable. At the company where I work, sustainability…
[…] (The following post from PLM Green Global Alliance cofounder Jos Voskuil first appeared in his European PLM-focused blog HERE.) […]
[…] recent discussions in the PLM ecosystem, including PSC Transition Technologies (EcoPLM), CIMPA PLM services (LCA), and the Design for…
Jos, all interesting and relevant. There are additional elements to be mentioned and Ontologies seem to be one of the…
Jos, as usual, you've provided a buffet of "food for thought". Where do you see AI being trained by a…