You are currently browsing the tag archive for the ‘Clayton M. Christensen’ tag.
It is interesting to read management books and articles and reflect the content in the context of PLM. In my previous post How the brain blocks PLM acceptance and in Stephen Porter´s (not yet finished) serial The PLM state: the 7 habits of highly effective PLM adoption, you can discover obvious points that we tend to forget in the scope of PLM as we are so focused on our discipline.
This summer holiday I was reading the Innovator´s Dilemma: When New Technologies Cause Great Firms to Fail by Clayton Christensen. Christensen is an associated professor at the Harvard Business School and he published this book already in 1997. Apparently not everyone has read the book and I recommend that if you are involved in the management of a PLM company to read it.
Christensen states there are two types of technologies. Leading companies are supporting their customers and try to serve them better and better by investing a lot in improving their current products. Christensen calls this sustaining technology as the aim is to improve existing products. Sustaining technologies lead to every time more and more effort to improve the current product performance and capabilities due to the chosen technology and solution concepts. These leading companies are all geared up around this delivery process and resources are optimized to sustain leadership, till ….
The other technology Christensen describes is disruptive technology, which initially is not considered as competition for existing technologies as it under performs in the same scope, so no way to serve the customer in the same way. The technology underperforms if you would apply to the same market, but it has unique capabilities that make it fit for another market. Next if the improvement path of disruptive technology can be faster than the improvement path for the sustaining technology, it is possible that their paths meet at a certain point. And although coming from a different set of capabilities, due to the faster improvement process the disruptive technology becomes the leading one and companies that introduced the disruptive technology became the new market leaders.
Why leading companies failed..
Christensen used the disk drive industry as an example as there the change in technology was so fast that it was a perfect industry to follow it´s dynamics. Later he illustrates the concepts with examples from other industries where the leading firms failed and stopped to exist because disruptive technologies overtook them and they were not able to follow that path too.
Although the leading companies have enough resources and skills, he illustrates that it is a kind of logical path – big companies will always fail as it is in their nature to focus on sustaining technology. Disruptive technologies do not get any attention as they are targeting a different unclear market in the beginning and in addition it is not clear where the value from this disruptive technology comes from, so which manager wants to risk his or her career to focus on something uncertain in an existing company.
Christensen therefore advises these leading companies, if they expect certain technologies to become disruptive for their business, to start a separate company and take a major share position there. Leave this company focus on its disruptive technology and in case they are successful and cross the path of the sustaining technology embed them again in your organization. Any other approach is almost sure to fail, quote:
Expecting achievement-driven employees in a large organization to devote critical mass of resources, attention and energy to disruptive projects targeted at a small market is equivalent to flapping one´s arms in an effort to fly
As the book was written in 1997, it was not in the context of PLM. Now let´s start with some questions.
Is ERP in the stage of sustaining technology?
Here I would say Yes. ERP vendors are extending their functional reach to cover more than the core functionality for two reasons: they need continuous growth in revenue and their customers ask for more functionality around the core. For sustaining technologies Christensen identifies four stages. Customers select a product for functionality, when other vendors have the same functionality reliability becomes the main differentiation. And after reliability the next phase is convenience and finally price.
From my personal observations, not through research, I would assume ERP for the major vendors is in the phase between convenience and price. If we follow Christensen´s analysis for SAP and Oracle it means they should not try to develop disruptive technologies inside their organization, neither should they try to downscale their product for the mid-market or add a different business model. Quote:
What goes up – does not go down. Moving to a high-end market is possible (and usually the target) – they will not go to small, poor defined low-end markets
How long SAP and Oracle will remain market leaders will depend on disruptive technologies that will meet the path of ERP vendors and generate a new wave. I am not aware of any trends in that area as I am not following the world of ERP closely
Is PLM in the stage of sustaining technology?
Here I would say No because I am not sure what to consider as a clear definition of PLM. Different vendors have a different opinion of what a PLM system should provide as core technologies. This makes it hard to measure it along the lifecycle of sustaining technology with the phases: functionality, reliability, convenience and price.
Where the three dominant PLM providers (DS/PTC/Siemens) battle in the areas of functionality, reliability and convenience others are focusing on convenience and price.
Some generalized thoughts passed my mind:
- DS and PTC somehow provoke their customers by launching new directions where they believe the customer will benefit from. This somehow makes it hard to call it sustaining technology.
- · Siemens claiming they develop their products based on what customers are asking for. According to Christensen they are at risk in the long term as customers keep you captive and do not lead you to disruptive technologies.
- · All three focus on the high-end and should not aim for smaller markets with the same technology. This justifies within DS the existence of CATIA and SolidWorks and in Siemens the existence of NX and SolidEdge. Unifying them would mean the end of their mid-market revenue and open it for others.
Disruptive technologies for PLM
Although PLM is not a sustained technology to my opinion, there are some disruptive technologies that might come into the picture of mainstream PLM.
First of all there is the Open Source software model, introduced by Aras, which initially is not considered as a serious threat for the classical PLM players – “big customers will never rely on open source”. However the Open Source model allows product improvements to move faster than main stream, reaching at a certain point the same level of functionality, reliability and convenience. The risk for Open Source PLM is that it is customer driven, which according Christensen is the major inhibitor for disruptive steps in the future
Next there is the cloud. Autodesk PLM and Kenesto are the two most visible companies in this domain related to PLM. Autodesk is operating from a comfort zone – it labels its product PLM, it does not try to match what the major PLM vendors try to do and they come from the small and medium mid-size market. Not too many barriers to come into the PLM mid-market in a disruptive manner. But does the mid-market need PLM? Is PLM a bad annotation for its cloud based product? Time will tell.
The management from Kenesto obviously has read the book. Although the initially concept came from PLM++ (bad marketing name), they do not to compete with mainstream PLM and aim their product at a different audience – business process automation. Then if their product picks up in the engineering / product domain, it might enter the PLM domain in a disruptive manner (all according to the book – they will become market leaders)
Finally Search Based Applications which are also a disruptive technology for the PLM domain. Many companies struggle with the structured data approach a classical PLM system requires and especially for mid-market companies this overhead is a burden. They are used to work in a cognitive manner, the validation and formalization is often done in the brain of experienced employees. Why cannot search based technology not be used to create structured data and replace or support the experienced brain?
If I open my Facebook page, I see new content related to where I am, what I have been saying or surfing for. Imagine an employee´s desktop that works similar, where your data is immediately visible and related information is shown. Some of the data might come from the structured system in the background, other might be displayed based on logical search criteria; the way our brain works. Some startups are working in this direction and Inforbix (congratulations Oleg & team) has already been acquired by Autodesk or Exalead by DS.
For both companies if they believe in the above concept, they should remain as long as possible independent from the big parent company as according to Christensen they will not get the right focus and priorities if they are part of the sustainable mainstream technology
This blog post was written during a relaxing holiday in Greece. The country here is in a crisis, they need disruptive politicians. They did it 3500 years ago and I noticed the environment is perfect for thinking as you can see below.
Meanwhile I am looking forward to your thoughts on PLM, in which state we are what the disruptive technologies are.