dontmissLast week I started my final preparation for the PLM Innovation Congress 2012 on February 22nd and 23rd in Munich, where I will speak about Making the Case for PLM. Looking forward for two intensive days of knowledge sharing and discussion

The question came to my mind that when you make the case for PLM, you also must be clear about what you mean by PLM. And here I started to struggle a little. I have my perception of PLM, but I am also aware everyone has a different perception about the meaning of PLM.

cmpicI wrote about it last year, triggered by a question in the CMPIC group (configuration management) on LinkedIn. The question was Aren’t CM and PLM the same thing ? There was a firm belief from some of the members that PLM was the IT-platform to implement CM.

PLM_PDM_CAD_networkA few days ago Inge Craninckx posted a question in the PDM PLM CAD network group about the definition of PLM based on a statement from the PLMIG. In short:

“PDM is the IT platform for PLM.”Or, expressed from the opposite viewpoint: “PLM is the business context in which PDM is implemented

The response from Rick Franzosa caught my attention and I extracted the following text:

The reality is that most PLM systems are doing PDM, managing product data via BOM management, vaulting and workflow. In that regard, PDM [read BOM management, vaulting and workflow], IS the IT platform for the, in some ways, unfulfilled promise of PLM.

I fully agree with Rick’s statement and coming back to my introduction about making the case for PLM, we need to differentiate how we implement PLM. Also we have to take into our minds that no vendor, so also not a PLM vendor, will undersell their product. They are all promising J

Two different types of PLM implementation

Originally PLM has started in 1999 by extending the reach of Product Data outside the engineering department. However besides just adding extra functionality to extend the coverage of the lifecycle, PLM also created the opportunity to do things different. And here I believe you can follow two different definitions and directions for PLM.

Let’s start with the non-disruptive approach, which I call the extended PDM approach

Extended PDM

expressWhen I worked 6 years ago with SmarTeam on the Express approach, the target was to provide an OOTB (Out of the Box) generic scenario for mid-market companies. Main messages were around quick implementation and extending the CAD data management with BOM and Workflow. Several vendors at that time have promoted their quick start packages for the mid-market, all avoiding one word: change.

I was a great believer of this approach, but the first benchmark project that I governed demonstrated that if you want to do it right, you need to change the way people work, and this takes time (It took 2+ years). For the details: See A PLM success story with ROI from 2009

NoChange

Cloud based solutions have become now the packaging for this OOTB approach enriched, with the ease of deployment – no IT investment needed (and everyone avoids the word change again).

If you do not want to change too much in your company, the easiest way to make PDM available for the enterprise is to extend this environment with an enterprise PLM layer for BOM management, manufacturing definition, program management, compliancy and more.

Ten years ago, big global enterprises started to implement this approach, using local PDM systems for mainly engineering data management and a PLM system for the enterprise. See picture below:

clip_image002

This approach is now adapted by the Autodesk PLM solution and also ARAS is marketing themselves in the same direction. You have a CAD data management environment and without changing much on that area, you connect the other disciplines and lifecycle stages of the product lifecycle by implementing an additional enterprise layer.

The advantage from this approach is you get a shared and connected data repository of your product data and you are able to extend this with common best practices, BOM management (all the variants EBOM/MBOM/SBOM, …) but also connect the market opportunities and the customer (Portfolio management, Systems engineering)

myplmThe big three, Dassault Systemes, Siemens PLM and PTC, provide the above functionality as a complete set of functionalities – either as a single platform or as a portfolio of products (check the difference between marketing and reality).

Oracle and SAP also fight for the enterprise layer from the ERP side, by providing their enterprise PLM functionality as an extension of their ERP functionality. Also here in two different ways: as a single platform or as a portfolio of products. As their nature is on efficient execution, I would position these vendors as the one that drive for efficiency in a company, assuming all activities somehow can be scheduled and predicted

My statement is that extended PDM leads to more efficiency, more quality (as you standardize on your processes) and for many companies this approach is a relative easy way to get into PLM (extended PDM). If your company exists because of bringing new products quickly to the market, I would start from the PDM/PLM side with my implementation.

The other PLM – innovative PLM

idea

Most PLM vendors associate the word PLM in their marketing language with Innovation. In the previous paragraph I avoided on purpose the word Innovation. How do PLM vendors believe they contribute to Innovation?

This is something you do not hear so much about. Yes, in marketing terms it works, but in reality? Only few companies have implemented PLM in a different way, most of the time because they do not carry years of history, numbering systems, standard procedures to consider or to change. They can implement PLM in a different way, as they are open to change.

If you want to be innovative, you need to implement PLM in a more disruptive manner, as you need to change the way your organization is triggered – see the diagram below:

PLM_flow

The whole organization works around the market, the customer. Understanding the customer and the market needs at every moment in the organization is key for making a change. For me, an indicator of innovative PLM is the way concept development is connected with the after sales market and the customers. Is there a structured, powerful connection in your company between these people? If not, you do the extended PLM, not the innovative PLM.

Innovative PLM requires a change in business as I described in my series around PLM 2.0. Personally I am a big believer that this type of PLM is the lifesaver for companies, but I also realize it is the hardest to implement as you need people that have the vision and power to change the company. And as I described in my PLM 2.0 series, the longer the company exist, the harder to make a fundamental change.

Conclusion

There are two main directions possible for PLM. The first and oldest approach, which is an extension of PDM and the second approach which is a new customer centric approach, driving innovation. Your choice to make the case for one or the other, based on your business strategy.

Looking forward to an interesting discussion and see you in Munich where I will make the case

PLM_inno_2012

About these ads